| HARDWARE |
| DIGI XBEE MODULE |
2.4 GHz: Digi XBee 3 Zigbee 3.0 MMT (XB3-24Z8UM) |
| DIGI CONNECTCORE MP157 |
STMicroelectronics STM32MP157C, Arm® dual Cortex®-A7 at 650 MHz, Cortex®-M4 at 209 MHz with FPU/MPU, 3D GPU, secure boot, crypto engine, 512 MB SLC NAND flash and 512 GB DDR3L, STMicroelectronics Power Management IC — STPMIC1 |
| ZIGBEE STACK |
Zigbee PRO |
| TRANSMIT POWER |
PRO: 63 mW (18 dBm) |
| RECEIVER SENSITIVITY |
−102 dBm |
| BLUETOOTH® VERSION |
Supports Bluetooth Low Energy 5.2 and capable of interoperating with Bluetooth Low Energy 5.2 devices that support 1M PHY.
Hardware is software upgradeable to 5.2 (not yet enabled except payload extensions). |
| XBEE CONNECTOR |
(1) 50 Ω RP-SMA (center pin: male) |
| MEMORY |
512 MB RAM, 512 MB flash; (1) microSD card slot |
| USB |
(1) USB type 2.0 |
| SOFTWARE AND MANAGEMENT |
| PYTHON |
Python 3 |
| REMOTE MANAGEMENT |
Digi Remote Manager®; SNMP v2/v3 (user installed/managed) |
| LOCAL MANAGEMENT |
WebUI (HTTP/HTTPS); CLI (Telnet, SSH) |
| MANAGEMENT / TROUBLESHOOTING TOOLS |
FTP client, SCP; protocol analyzer with PCAP for Wireshark; event logging with syslog and SMTP client; NTP/SNTP; Nagios, Intelliflow, iPerf, Dynamic DNS, ping, traceroute |
| ETHERNET |
| PORTS |
(1) RJ-45; 10/100 Mbps (auto-sensing) |
| SERIAL |
| PORTS |
(1) RJ-45 10-pin (10P10C); RS-232/485; software selectable
- RS-232 DTE (RXD, TXD, RTS, CTS, DTR, DCD, DSR, RI)
- RS-485 (TX/RX+; RX/TX-); half-duplex |
| WI-FI / BLUETOOTH LOW ENERGY |
| TECHNOLOGY |
Wi-Fi 5 dual-band 802.11a/b/g/n/ac 1x1 radio (up to 433.3 Mbps) with strong SPA3-Enterprise authentication/encryption, Bluetooth 5.2 (Basic Rate, Enhanced Data Rate and Bluetooth Low Energy) |
| SECURITY |
WPA, WPA2 and WPA3 Personal and Enterprise, Open and Open Enhanced security standards |
| HOTSPOT |
Captive portal with customizable splash page, terms and conditions, shared password, user-specific password, RADIUS authentication |
| THIRD-PARTY SERVICES |
Content filtering, embedded advertising |
| USER MANAGEMENT |
Per-client usage limit and reporting |
| MODES |
Simultaneous client and access point support |
| CONNECTORS |
(1) 50 Ω RP-SMA (center pin: male) |
| CELLULAR |
| 4G LTE CAT 1 |
Digi XBee 3 Global LTE Cat 1 (Thales PLS63-W) |
| ANTENNAS |
(2) 50 Ω RP-SMA (center pin: female) |
| SIMS |
(1) External (4FF SIM) |
| PHYSICAL |
| DIMENSIONS (L x W x H) |
148 mm x 99 mm x 33 mm (5.83 in x 3.9 in x 1.3 in) |
| WEIGHT |
0.24 kg (0.53 lb) |
| STATUS LEDs |
Power, XBee, Cellular (where applicable), Wi-Fi (where applicable), User |
| BUTTONS |
Erase, User |
| ENCLOSURE |
ABS, flame rating: UL94-HB |
| POWER REQUIREMENTS |
| POWER INPUT |
9 - 30 VDC, 1.0 A maximum |
| POWER CONSUMPTION |
1.75 W typical (idle); 9 W typical (peak Tx/Rx) |
| ENVIRONMENTAL |
| OPERATING TEMPERATURE |
PCB: −40 ºC to 70 ºC (−40 ºF to 158 ºF)
With enclosure: 0 ºC to 40 ºC (32 ºF to 104 ºF) |
| RELATIVE HUMIDITY |
95% ROHS |
| REGULATORY APPROVALS* |
| CELLULAR AND REGULATORY |
Visit www.digi.com/resources/certifications for latest cellular and regulatory approvals |
| SAFETY |
IEC62368-1 |
| EMISSIONS |
CE; RED; FCC Part 15, Subpart B*; ICES-003; AU/NZS CISPR32 |
| CELLULAR |
Visit www.digi.com/resources/certifications for latest certifications and approvals. |
| WARRANTY |
| PRODUCT WARRANTY |
3-year* |