By default, the IX15 and related products are Cellular Routers. What that means is the IX series of routers will route traffic form the LAN port over the Cellular connection. To disable this, the following rule can be set up:
- Browse to the WebUI of your IX15 or similar DAL device
- Under the System > Configuration tab, select "Device Configuration"
- Select Network > Routers > Policy-based routing
- Click on "Create" and create a rule with the following values:
Enable
Label: Block_LAN_From_Cellular
Interface: Loopback
Source Address:
Type: Interface
Interface: ETH
Destination Address:
Type: Interface
Interface: Modem
Last updated:
Jan 01, 2024