Microsoft Telnet with PortServer results in Double Carriage Return/Line Feed (CR/LF) and Failure to Login

Symptom:

Telnetting into the PortServer (II or TS) is successful, but you may get double CR/LF, so the device on the end of the serial port sees 2 CRs and login fails. 

Cause:

This is a known issue with the Windows Telnet Client.

Solutions:

1. If you use a different telnet client, the double CR/LF issue should be resolved and a login should be successful.

2. On the TS product line (not on the Portserver II) you can issue the following command as a workaround:

  • set telnetip ip=IP_ADDRESS mask=MASK_VALUE mode=striplf
Last updated: Jan 11, 2024

Filed Under

Network

Recently Viewed

No recently viewed articles

Did you find this article helpful?